•  DE | EN
TOP

Cooling blowers

Cooling blowers are used for cooling the shakers. TIRA mainly offers side channel blowers that provide an above-average cooling performance in comparison with axial  blowers. The low-maintenance blowers can also be installed outdoors.

TB 0080 (for shakers with a nominal force of 200 N)

Volume flow:80 m³/h
Air hose diameter:40 mm
Dimensions WxHxD:246 x 247 x 256 mm
Total mass:10 kg
Used in vibration test systems:TV 51120(-M/-C), TV 52120, TV 51125-IN

TB 0140 (for shakers with a nominal force of 400 N to 1000 N)

Cooling blower TB 0140
Volume flow: 140 m³/h
Air hose diameter: 50 mm
Dimensions WxHxD: 286 x 302 x 292 mm
Total mass: 16 kg
Used in vibration test systems: TV 51140(-M/-C/-IN), TV 51165-IN, TV 5220(-M), TV 54216

TB 0310 (for shakers with a nominal force of 2700 N to 4000 N)

Volume flow:315 m³/h
Air hose diameter:60 mm
Dimensions WxHxD:382 x 384 x 432 mm
Total mass:42 kg
Used in vibration test systems:TV 50350(-M), TV 55240(-LSS/-MLSS)

TB 9 FUK (for shakers with a nominal force of 8 kN)

Volume flow:1080 m³/h
Air hose diameter:140 mm
Dimensions WxHxD:505 x 598 x 464 mm
Total mass:60 kg
Used in vibration test systems:TV 56280(-LSS/-MLSS)

TB 120 FUK (for shakers with a nominal force of 11 kN to 15 kN)

Cooling blower TB 120 FUK
Volume flow: 1500 m³/h
Air hose diameter: 140 mm
Dimensions WxHxD: 487 x 637 x 487 mm
Total mass: 61 kg
Used in vibration test systems: TV 51010(-LSS/-MLSS), TV 57315(-LSS/-MLSS)

TB 7/FUK/11 (for shakers with a nominal force of 22 kN to 35 kN)

Volume flow:1920 m³/h
Air hose diameter:150 mm
Dimensions WxHxD:625 x 775 x 602 mm
Total mass:113 kg
Used in vibration test systems:TV 59322, TV 59327, TV 59335

TB 7/FUK/20 (for shakers with a nominal force of 49 kN and 56 kN)

Volume flow: 5820 m³/h
Air hose diameter: 175 mm
Dimensions WxHxD: 625 x 773 x 602 mm
Total mass: 131 kg
Used in vibration test systems: T V 59349, TV 59356

TB HR160 (for shakers with a nominal force of 70 kN)

Volume flow: 6600 m³/h
Air hose diameter: 175 mm
Dimensions WxHxD: 672 x 760 x 730 mm
Total mass: 97.5 kg
Used in vibration test systems: TV 59370

Noise protection

An aerated sound-absorbing chamber is offered for installing the cooling blower in closed rooms. In addition to this, silencers for damping the blow-off noise are offered.

Acoustic enclosure

Acoustic enclosure TB 0140-AE
Acoustic enclosure TB 0140-AE
Acoustic enclosure TB 7/FUK-AE
Acoustic enclosure TB 7/FUK-AE

Blower

Acoustic enclosure

Designation Designation Dimensions LxWxH Mass Noise reduction*
TB 0080 TB 0080-AE 860 x 650 x 760 mm 45 kg 15-23 dB(A)
TB 0140 TB 0140-AE 860 x 650 x 760 mm 45 kg 15-23 dB(A)
TB 0310 TB 0310-AE 860 x 650 x 760 mm 55 kg 15-23 dB(A)
TB 9 FUK TB 9-AE 1470 x 1250 x 1393 mm 103 kg 5-23 dB(A)
TB 120 FUK TB 120-AE 1470 x 1250 x 1393 mm 103 kg 5-23 dB(A)
TB 7/FUK TB 7/FUK-AE 1470 x 1250 x 1393 mm 103 kg 5-23 dB(A)

 *depending on frequency

Silencer

Silencer TB 0140-SI
Silencer TB 0140-SI
Silencer TB 9-SI
Silencer TB 9-SI

Blower

Silencer

Designation Designation Dimensions LxD Mass Noise reduction*
TB 0080 TB 0080-SI 310 x 65 mm 0.2 kg 5 dB(A)
TB 0140 TB 0140-SI 308 x 82 mm 0.2 kg 8 dB(A)
TB 0310 TB 0310-SI 308 x 82 mm 0.58 kg 6 dB(A)
TB 9 FUK TB 9-SI 1012 x 150 mm 1.2 kg 3-6 dB(A)
TB 120 FUK TB 120-SI 1100 x 160 mm 1.2 kg 3-6 dB(A)
TB 7/FUK TB 7/FUK-SI 1120 x 280 mm 9.2 kg 9-15 dB(A)

 **depending on frequency


Air-Water-Heat exchanger

The newly by TIRA developed Air-Water-Heat exchanger WWT is used for cooling down the exhaust air of the vibration test system to room temperature. This allows the operation inside rooms without problems. The heat exchanger is additionally designed as a noise protection casing and therefore offers highly efficient silencing
performance.

Air-Water-Heat exchanger

Water/Heat exchanger WWT

Blower

Air-Water-Heat exchanger

Designation Designation Dimensions LxWxH Mass Noise reduction*
TB 7/FUK WWT 1200x1500x2080 mm 800 kg kg 30 dB(A)

 *depending on frequency

Download Cooling blowers